Penn Slammer IV Spinning Reel Review (Pros & Cons)
- By: Justin Ritchey
- on
Should YOU buy a Penn Slammer IV Spinning Reel?
This video is NOT going to be a generic explanation of specs and reading off of the back of the box.
Instead, I want to elaborate on the features of the Slammer VI and whether or not you should look into it.
Learn more about this reel from Penn in the video below!!
Penn Slammer IV Spinning Reel Review [VIDEO]
Get the Penn Slammer VI Spinning Reel
CNC Gear Technology
CNC Gearing stands for Computerized Numerical Control.
This is a process where computers determine exactly how deep the teeth are cut within the main gear of the reel.
This is the epitome of precision.
The gears are fully designed using CNC Gear Technology.
In the case of the Slammer IV, the main gear is made of brass.
When you jump up to the DX Series, that is replaced with a stainless steel main gear.
There are a few benefits of a brass main gear over an aluminum main gear.
Brass is a tougher material, the teeth of the gear will remain intact longer, and will wear better over time.
Both metals are excellent, but the fact that you can bump up to a higher-grade metal is an added bonus.
IPX6 Seal Rating
IP stands for Ingress Protection followed by TWO numbers.
The first number denotes how well the product is sealed from solids like dust.
In the case of a spinning reel, that is negligible for the most part.
The second number denotes how well the product is sealed from liquid contaminants.
The Slammer VI had jets of water blasted onto it at 100 liters/minute for 3 minutes at 3 meters away.
After undergoing this test, Penn can determine how much water, if any, got into the gearbox.
It is RARE we would ever run into a situation with jets of water shooting out at our spinning reels, but you have it if you need it!
This reel is NOT fully sealed but it can handle the elements well.
Physical Sealing
There are physical rubber seals all over this reel to prevent contaminants from getting in.
The difference with this reel is that Penn also decided to use sealed ball bearings.
Just because a reel has 11 or 12 ball bearings, that doesn’t necessarily mean that it’s better than other reels.
It is all about the QUALITY of the ball bearings and the LOCATION of the bearings within the reel.
Penn includes a sealed ball bearing within the spool itself.
That means that when the drag is engaged, the spool spins on the sealed ball bearing.
Additionally, there is another sealed ball bearing on the handle entry point as well as another at the top of the anti-reverse clutch.
These are all ideal spots for high-quality ball bearings.
Dura-Drag
If you tuned into the Penn Spinfisher VI video I put out a few weeks ago, I go more into depth and showcase the HT-100 drag which is standard in just about every Penn reel.
HT stands for High-Tech.
The 100 comes from Penn’s system to pull a monofilament line and engage the carbon-fiber disc drag for 100 miles.
Then, Penn assessed the quality of that carbon-fiber disc to reveal no degradation.
Dura-Drag is a step UP from that.
Penn makes use of a phenolic coating that bonds the carbon-fiber washer to the eared washer.
Underneath the spool, there is a plate that houses the Dura-Drag system.
Dura-Drag in tandem with the coating is meant to extend the life and performance of the carbon fiber.
The HT-100 drag system is well thought out so to take that and elevate it a step further only adds to the quality.
In the case of the Slammer IV, the 3500 size reels and above include Dura-Drag while the 2500 size has an HT-100 drag.
Cons & Things To Consider
Similarly, with the Spinfisher VI and a lot of Penn reels that are solid-aluminum bodies, the Slammer IV is on the heavier side.
These reels are flat-out heavier than other aluminum-bodied reels of similar sizes from competing brands.
If you’re in the market for a lightweight reel to balance your fishing rod and throw finesse artificial lures, this might not be the reel that is best suited for that application.
Can it get the job done? No doubt.
But it won’t have that refinement from a lightweight standpoint that inshore anglers might be used to.
On a similar note, the gear design is excellent, however, due to all of the internal physical seals, the overall smoothness and startup of the reel come into question.
The Slammer IV may not feel as smooth as competing products.
Something to make note of is that these reels DO in fact wear in over time.
After a little bit of use, these reels perform a bit better.
Reel Spooling
If you are a Salt Strong Insider Member, if you buy any reel in our tackle shop, we’re going to give you FREE braided line AND we’ll spool it up for you on top of FREE SHIPPING!
All you have to do is pair it up with a fishing rod, tie on a leader, and hit the water!!
Get the Penn Slammer VI Spinning Reel
Conclusion
All in all, the Slammer IV is an EXCELLENT reel with high-quality components that perform well over time.
Out of the box, it doesn’t have the same feel as other reels in its class but it will get the job done.
What other questions or comments do you have about the Penn Slammer IV Spinning Reel Review?
Please go ahead and get the conversation started below – I will be sure to answer all your questions in the comments section!!!
Get the Penn Slammer VI Spinning Reel
Are you struggling to catch fish in your local area?
The 90/10 Rule will help you find more feeding fish, you’ve just got to know where to start.
That’s where we come in.
Want the 90/10 Fishing Recipe for YOUR local area?
Get your Custom 90/10 Recipe HERE!
Please go ahead and leave us a comment down below!!
Finding The Fish Help
In order to help make sure that you are targeting the right areas based on the latest feeding trends and upcoming weather forecasts, make sure to use the following 3 resources because they will save you a ton of time.
1. Weekend Game Plans (updated weekly)
These regional game plans will show you exactly what types of spots to target in under 10 minutes… just click the video to start, and you’ll be informed on what to do on your next trip.
2. Smart Fishing Spots Platform (updated every 15 minutes)
This exclusive software literally shows you where the most fish are likely to be feeding based on exactly when you’ll be fishing. It factors in the tides, wind, and weather to help you quickly see which areas to target throughout the day.
3. Community Reports (live feed)
The Insider Community platform is what you can use to see what is biting near you, and you can get to know other members who fish in your area. Plus, you can use it to keep a log of your catches so you can use past trips to help predict future catches.
Related categories:
STOP WASTING TIME ON THE WATER!
Do what the “SMART ANGLERS” are doing and join the Insider Club.
Here’s what you’ll receive today when you join:
- Weekly fishing reports and TRENDS revealing exactly where you should fish every trip
- Weekly “spot dissection” videos that walk you through all the best spots in your area
- Exclusive fishing tips from the PROS you can’t find anywhere else
- Everything you need to start catching fish more consistently (regardless if you fish out of a boat, kayak, or land).
Why do you say it has a different feel from other reels at its price point?
Because the reel has a slower start-up inertia when turning the handle. This is because of the high-level of sealing the Slammer IV offers. Most other $300+ Reels on the market feel much smoother, initially. After some use the Slammer IV will wear in very well.
Nice Indept review of the penn IV.. I Personally LOVE my penn reels Beter than Any other brands i have owned! Yes, they are a Little bit heavier… but hey,… for us Men.. lets be honest, a reel around 1 pound is Really not that big of a deal! I cast mine All day long! And sometimes that literally means 10 to 12 hrs! Lol. It’s worth the Extra weight when it comes to Durability and dependability!! I can Always depend on my Penn reels to stand up to whatever i throw at it! Of course i Always Rinse after use, and anywhere from 4 to 6 months, i open and clean and relube as a maintenance! Penn is The Best, at an Affordable price!
Appreciate the awesome comment here, Ronald!
I really appreciate these videos and updates and reviews on products. Thanks, keep up the great work!
Thanks for watching & commenting here, Frank!
Great video, I’m looking for a new reel to use for surf and inshore fishing and this gave me a lot of useful information.
Happy to help, Ron!
That was a great video, I am glad you do these to help keep us informed and able to make good decisions.
Appreciate that, John. It’s encouraging to hear that this information is helpful to others before they buy.
Justin…Another difference between the 2500 and its bigger brothers is the 3500 and up come with two handles whereas the 2500 has a single foam-grip handle. Also, I purchased a Slammer IV 2500 from a large Penn retailer in France because they were less expensive. Big mistake as it was a knock off even though it sure looked OEM. The knock off wind knotted on almost every cast regardless of how full the spool was and the total lack of wind and would not lay line level regardless of washers I placed under the spool. Long story short I sold it and bought another locally. All the difference in the world. I love the reel but it is not a Saltist LT!
Good points, Kim. I would ALWAYS suggest purchasing a major manufacture brand from an Authorized Retailer (there are definitely knock offs out there on the market). Sorry to hear about this experience.
That is one of the challenging things when it comes to comparing one brand to the next, is that Penn kind of seems like it’s in its own category. It’s not as lightweight or finesse feeling as a Daiwa or a Shimano, but I don’t think that was Penn’s objective from the start. They are well built reels with a different purpose. I enjoy my Saltist MQ for many inshore scenarios, but I’m enjoying my Slammer IV DX for other scenarios.
I think that this analysis is spot on, made the tough decision easier.
Thank you, Jeremiah. Can’t wait to hear about your experience with the Slammer IV.
Thanks for the update, I have 2 Penn reels 2500 pursuit 4 and Slammer 560 I now understand about the smoothness is all about, I just need to use them more.
Happy to share my experience with you, Jim!
Confused me with the Slammer IV and the slammer VI
Excellent well presented analysis, as always Justin. You mentioned that anglers might not be hitting their reels with such powerful jets of water, but at least they can be assured that if they spray off their equipment with a garden hose after using it, they are not getting water inside the reel.
Bill
Thank you Bill! That’s a very good point. I always encourage anglers to use a light spray setting with their hose when spraying down their gear at the end of the day (as to not force unnecessary water inside the gear box). But you’re right, if in the even they do use a lot of pressure with the hose, water won’t get inside the Slammer IV!
Very interesting Juistin. I’m trying to find a previous video that I think you did about basic oil and lubing a reel. I can’t locate it. Did you do one and where do I find it? Thanks much Buzz
Hey Buzz. Are you talking about this video that Tony made a few years ago?
How To Make Your Spinning Reels Last Longer (Tips, Tools & Mistakes) (saltstrong.com)